Polycarbonate screens have valuable safety qualities however they are prone to scratching that, over time, can cause severe reduction in vision for the operator. Glasspro provides a means to clients of reducing the need for polycarbonate replacement by minimising the risk of damage incurred. In today's competitive market this assists by containing costs for businesses by extending the life of the polycarbonate.
Glasspro supplies and fits a thin, clear film to polycarbonate on machines and vehicles. This film is fitted as a shock absorbing or 'sacrificial' protective layer to expensive polycarbonates (such as Margard or Lexan) so that if the film gets damaged it can be replaced at a small cost compared to replacing the polycarbonate itself. One of the many advantages is that the film can be polished, therefore removing some scratches from the film and extending its useful life.
Our product will improve visibility by up to 80% on already scratched or damaged Polycarbonate and will prevent any scratches on new serfaces.
Windscreen wipers can be used successfully on the product!
Having mastered the technique we then ran a trial on Broken Hill Logging's new Satco machine, applying the product to all 8 polycarbonate windows. The results of this trial were very impressive - the film allowed the operator to clean the surfaces without scratching and also improved visibility as the rain runs off the film far better than the polycarbonate surface. This trial has been monitored closely and has now been on the machine for over 2 years. There are no signs of deterioration, bubbling or scratching.
The operator of the machine has found our product a great option as opposed to putting up with the scratching of the polycarbonate and having to replace the screens when it is impossible to see through; at substantial cost. Instead the film can be polished and then eventually removed and replaced if it gets too damaged at a fraction of the cost of the polycarbonate.
GLASSPRO WILL GUARANTEE:
Subject to the volume of vehicles to be done at each location we will not charge any additional travel costs. Where possible we will liaise with several businesses to achieve this.
A fitting programme to suit your business needs, including working on Saturdays and Sundays, where necessary, without any additional charges being incurred.
Our workmanship - if any fault occurs due to the application process, Glasspro will replace it free of charge.
Glasspro differs from other fitters of protective film businesses in New Zealand in its innovative use of the product on the outside of screens and has spent considerable time in research and development to perfect and adapt the fitting process to suit various business needs.
We have mastered the technique of applications onto a variety of materials such as polycarbonates. We are working with film suppliers on a daily basis to provide the best product and process for our clients in a proactive way.
PRICING
Glasspro has the experience of fitting our product to many makes of vehicles and machines. Machines vary considerably and pricing reflects the size and number of windows to be covered and the labour required. The following gives an indication:
The price for protecting a cab can range from $190+GST to $500+GST depending on the size of the cab and how many windows are selected
However, any vehicle can be catered for as our product is measured and cut to fit by our experienced fitting team.
Glasspro's policy is to keep our margins slim and make the product affordable and cost-effective.
|
